Channel: credentiality
Mark channel Not-Safe-For-Work? cancel confirm NSFW Votes: (0 votes)
Are you the publisher? Claim or contact us about this channel.

Compile NVidia Jetson TX1 kernel on device

There are lots of threads about problems compiling new kernels for their Jetson TX1 boards.  A lot of the issues seem to be related to the cross compilation environment.

The TX1 is pretty beefy, so I figure it can compile its own kernel.  I installed an SSD to give me enough disk space, then copied the source_sync.sh script from the Jetpack installation to the device.  I had it download the 'tegra-l4t-r24.2.1' tag which is currently the latest version.

I copied over the .config file from /usr/src/linux-headers-3.10.96-tegra/ to my kernel/ directory to start with the stock kernel config.  Then I ran make menuconfig to set the additional modules I wanted.

Alas, when I tried to compile with make -j6 zImage, I got errors like this:

  VDSO32C arch/arm64/kernel/vdso32/vgettimeofday.o
/bin/sh: 1: -Wp,-MD,arch/arm64/kernel/vdso32/.vgettimeofday.o.d: not found
/mnt/ocz_ssd/leopard/kernel/arch/arm64/kernel/vdso32/Makefile:40: recipe for target 'arch/arm64/kernel/vdso32/vgettimeofday.o' failed
make[2]: *** [arch/arm64/kernel/vdso32/vgettimeofday.o] Error 127
scripts/Makefile.build:455: recipe for target 'arch/arm64/kernel/vdso32' failed

Apparently it has something to do with backward compatibility to 32-bit ARM, which I don't even care about.   To get around that, I installed the 32-bit toolchain with 'sudo apt-get install gcc-arm-linux-gnueabihf', then export CROSS32CC=arm-linux-gnueabihf-gcc

The next issue was this:

drivers/platform/tegra/tegra21_clocks.c: In function ‘tegra21_cpu_clk_init’:
drivers/platform/tegra/tegra21_clocks.c:1064:31: error: logical not is only applied to the left hand side of comparison [-Werror=logical-not-parentheses]
c->state = (!is_lp_cluster() == (c->u.cpu.mode == MODE_G)) ? ON : OFF;

That was fixed with an extra set of parentheses:

  c->state = ((!is_lp_cluster()) == (c->u.cpu.mode == MODE_G)) ? ON : OFF;

That seems to do it.  I could then make -j6 zImage as well as Image, modules and (sudo) modules_install, then copy the zImage and Image to /boot.

Latest Images

Trending Articles